VIEW OUR NEW RANGE OF PRODUCTS
We are adding items to the site all the time, here is a list of some of the recent additions to the site
Soot Sheet 4 – Mark 2 – Updated product
Designed for Stove Pipes with Sweeping Access
This product has been updated. It incorporates a facility for a vacuum access point. We have also taken feedback from customers and enhanced the length of the Velcro straps.
Sheet four comes with one sweeping access point. This sleeve offers the facility to provide a traditional sweep or a power sweep.
This Sweepmate sheet has a seal-tight aperture for rod access. Sealing is via Velcro strapping and drawstring ties. Seals securely around the pipe via four Velcro straps.
Please Note* Plastic Pipes are display purposes only and not included
Appprox size 23″ x 23″ (58.5cm x 58.5cm)
CHIMNEY SWEEPING EQUIPMENT
Sweeping Access Plate End Cap – A20
Sweeping Access Plate End Cap
The Sweeping Access Plate End Cap are caps that fit onto any of our IL 5″ collars.
Materials:
- Made from Galvanized Metal
Available at special discount if purchased with Sweeping Access Plate
This item can be purchased at a reduced price if you order also contains one of the Sweeping Access Plates.
CHIMNEY SWEEPING EQUIPMENT
Sweeping Access Plate C – A19
Sweeping Access Plate C
The Sweeping Access Plate is an adaptor that connects to a debris board to be able to sweep the chimney, it comes with a fireproof seal.
Dimensions:
- 8″ x 8″ Square
- 5″ IL Collar
Materials:
- Made from Galvanised 1mm Metal
CHIMNEY SWEEPING EQUIPMENT
Sweeping Access Plate B – A18
Sweeping Access Plate B
The Sweeping Access Plate is an adaptor that connects to a debris board to be able to sweep the chimney, it comes with a fireproof seal.
Dimensions:
- 11″ x 8″
- 5″ IL Collar
Materials:
- Made from Galvanised 1mm Metal
CHIMNEY SWEEPING EQUIPMENT
Sweeping Access Plate A – A17
Sweeping Access Plate A
The Sweeping Access Plate is an adaptor that connects to a debris board to be able to sweep the chimney, it comes with a fireproof seal.
Dimensions:
- 8″ Square
- 5″ IL Collar
Materials:
- Made from Galvanised 1mm Metal
CHIMNEY SWEEPING EQUIPMENT
Soot Door Adapter – A16
Soot Door Adapter
The Soot Door Adaptor is made from 1mm Galvanised Metal. It has a rubber seal at the rear ensuring a seal between the adaptor and the plaster work.
It is designed to sweep chimneys using a Y-Junction Sleeve.
Dimensions:
- Overall: 11″ x 11″ Square
- 5″ IL Sleeve
CHIMNEY SWEEPING EQUIPMENT
Y – Junction Sweeping Sleeve – S14
Y – Junction Sweeping Sleeve
The Y-Junction Sweeping Sleeve is designed to sweep and vacuum at the same time. It is simply secured with a locking band.
Dimensions:
- Overall: Length 20″ x 5.5″ Wide
- Length of Junction: 7″
Materials:
- 65% Polyester
- 35% Cotton
CHIMNEY SWEEPING EQUIPMENT
Wall Soot Protection Sheet – S13
Wall Soot Protection Sheet
The Wall Soot Protection Sheet is used in conjunction with a Soot Door Adapter for sweeping chimneys with Y Junction Sweeping Sleeve. Simply use masking tape to secure the sheet to the wall. With added pocket to catch any falling soot.
By taping all around the window you have the added feature of not allowing soot to go behind the sheet.
Dimensions:
- Overall: 29″ x 29″ Square
- Window: 12″ x 12″ Square open window
- Pocket: 4″ deep, pocket with velocro straps
Materials:
- 65% Polyester
- 35% Cotton
CHIMNEY SWEEPING EQUIPMENT
IMPORTANT!
When ‘Power Sweeping’, ensure that correct length of plastic pipe is inserted and properly secured to the sleeve using the velcro strapping in-order to prevent movement which could result in damage to sleeve and stitching.